Motor Valves
Motor Valves
Motor valves for precision flow control
Supports customization of flow characteristics and fine-tuning of flow control
- Enables flow control of small- and medium-volume fluids, and can be incorporated into cogeneration systems for medium- and high-temperature fluids

Model | Rotating 2-way valve |
---|---|
Compatible fluid | Water |
Fluid pressure range | 0 to 0.8MPa |
Ambient temperature range | 0 to 40℃ |
Fluid temperature range | 0 to 80℃ |
Body material | SUS304 |
Valve material | SUS304 |
Rotating seal material | H-NBR |
Joint diameter | Rc1/2 |


Motor Valves
Compact motor ball valve MB-07A
- Low-cost plastic motor valve
- Lightweight and compact size
- Body material can be selected according to fluid type
- Long service life

Fluid types | Water, corrosive liquids, chemical solution |
---|---|
Max Pressure | 0.98Mpa (10kgf/cm2) |
Power Supply Voltage | AC100V (50/60Hz) |
Time Required to Open/Close
MB-07A |
20/16.5sec(50/60Hz) |
Time Required to Open/Close MB-07A |
20/16.5sec(50/61Hz) |
Motor type | Synchronous motor |
Rated output | 3.5/4W (50/60Hz) |
Insulation Type | JIS Type E |
Motor protection | Impedance-protection system |
Operating ambient temperature | -10~50℃ |
Protective structure | IP54 |
Weight | Approximately 0.7 kg |
Fluid operating temperature range Body material/Fluid temperature range |
U-PVC/0~50℃ C-PVC/0~90℃ PP/-20~50℃ PVDF/-20~100℃ |
External Dimensions

Dimension Table
横にスクロールしてご覧いただけます。
Aperture | d | L | H | H2 | Pore size | Cv Value |
---|---|---|---|---|---|---|
15A | Rc 1/2 | 102 | 112 | 29 | 15 | 13.9 |
20A | Rc 3/4 | 120 | 119 | 35 | 20 | 23.8 |
25A | Rc 1 | 131 | 126 | 39 | 25 | 46.5 |
Wiring Diagram
